EC230l Specifications

View Diagram
Download Complete Details

This warming cabinet is designed to safely store and warm either irrigation fluids or injection fluids.

The single compartment warming cabinet is constructed with 20 gauge stainless steel exterior casing and door with handle and hinges designed to withstand heavy usage. The cabinet is warmed using the patented Halo HeatŪ low-heat-density electrothermal cable array. The electrothermal cable is positioned in the floor and two sides of the warming cabinet, providing even heating of the interior chamber. The interior chamber temperature is regulated by an electronic control. A fan located inside the chamber mixes the air to prevent temperature stratification and to ensure an accurate chamber temperature within +/-3° F (+/-1.6° C) of the set-point.

The electronic control consists of a 4 digit L.E.D. display, On/Off key, heat indicator, increase and decrease keys, built-in lock-out feature and a series of prompt sequence indicators. The control can easily be set to operate in Celsius or Fahrenheit. Fail-safe feature "remembers" the operational mode in the event of a power failure. Once power is restored, the warmer will begin to operate as before. Individual temperature controls for irrigation fluids (IRR) and injection fluids (INJ) allow for precise temperature settings. IRR temperature may be adjusted from 90° to 150°F (32° to 66°C) while the INJ temperature range is 90 F to 110° F (32° to 43°C). An alarm will sound if temperature exceeds 10°F (6°C) over the set-point temperature. An additional built-in safety override feature prevents the cabinet from overheating.

This model is equipped with one (1) white, epoxy-coated wire basket mounted on slides, with a 12 liter capacity to accommodate most commonly used surgical fluids packaged in bags or bottles. The cabinet is furnished with four (4) 1-1/4" (32mm) non-skid rubber feet.